End caps
A clip-on stop end, plain or with a spout to a hose or downpipe. Seal it with a bead of silicone.
112 half round115 deepflowspout option
Make an end cap
UK guttering
Gutter fittings you can print today.
Clip-on end caps, joins, branches, brackets and adapters for standard UK gutter. Pick your gutter, check the fit, download the STL.
Choose a generator- 112mm half round
- 115mm deepflow
- 60° to 180° angles
- T and Y branches
Choose a generator
Each one opens a workbench with a live 3D view and an STL download.
Joins
Straight unions, and angle joints from 60° to 180°. One part fits inside and outside corners.
union60–180°
Make a join
Branches
T and Y branches where a side run meets a main run. The floor stays level so water runs through.
T and Y45–135°
Make a branch
Adapters
Join two different gutters: half round to deepflow, or an older size to today’s 112mm.
half round ↔ deepflowany sizes
Make an adapter
render to come
Clips
Gutter brackets braced back to a screw foot. Sized from the weight of a full gutter.
wall or fasciaPETG
Make a clip
next up
Downpipe fittings
Next in the set: fittings for round and square downpipe.
roundsquare
Coming soon
How it works
- step 1
Pick your size
Choose a standard gutter or type in your own measurements. The 3D view updates as you go.
- step 2
Print the fit test
A 10mm test piece checks the fit on an offcut in about 15 minutes.
- step 3
Download and print
Get a zip with the STL and a note of your settings. Print notes say which way up and what supports.
Every generator runs OpenSCAD in your browser, so nothing is uploaded. Each one is a parametric model: a size change is a setting, not a new design.
Questions
Will a printed fitting fit my gutter?
Each generator has presets for standard UK 112mm half round and 115mm deepflow gutter, or you can type in your own measurements. Print the 10mm fit test first and try it on an offcut: it takes about 15 minutes.
What filament should I use for outdoor gutter fittings?
PETG or ASA. Both cope with sun, rain and frost. PLA softens in summer sun, so avoid it for anything outside.
What size printer do I need?
Every part is sized to print on a 220mm bed, like a Creality Ender V3, so most home printers can print them.
How do I seal a printed end cap or join?
The fittings clip on. Run a bead of exterior silicone in the channel before you fit it, as you would with a plastic gutter fitting from a shop.
Is it free? Do I need to install anything?
It is free and runs in your browser. Each generator runs OpenSCAD locally, so nothing is uploaded and there is nothing to install.
Built by Will
Hi, I'm Will. I make these for jobs around my own house: a gutter that needs a quick fix, or a drawer of cables to tidy. Every part is sized to print on a 220mm bed, like a Creality Ender V3.